Vial Filler and Capper Machine suitable for filling, bunging and capping of injection glass vials. Filler Capper is the monobloc machine which perform filling, stoppering and capping operations on same platform. All contact parts are made from Stainless Steel or FDA approved materials for GMP compliance.
Different options of filling pump avaialble which provide filling precison of ±1%. We also offer Vial Capper Machine and Vial Labeler Machine which makes complete automatic Vial Filler Capper and Laberler Line. Our Filler range provide output ranging from 20 VPM to 250 VPM.
.
The incoming dry vials (sterilized and siliconised) are fed through the in-feed turn table and suitably guided on the moving Stainless Steel slat conveyor belt at the required speed of the correct placement below filling unit.
The filling unit consists syringes & nozzles. Syringes are made of Stainless Steel 316L material for cGMP compliance. Vials stop below filling unit with centering of filling nozzles, during stoppage nozzles discharge pre determined liquid into vials. Duly filled vials delivered on stoppering unit which is mounted on same platform.
Stoppering Unit consist Bowl and Chute designed for desired stopper / bung size. Stoppers are stored in vibratory bowl and delivered to the vial through delivery chute. Vibratory bowl is equipped with special vibrator motor. Stoppers travel in vibratory bowl support guide through vibration. There is arrangement in the bowl in which wrong position stopper get rejected in travelling and only correct position of stopper get into chute. Further stoppers hold at delivery point of chute through spring which collected one by one by vial in traveling below the chute. Further there is one Stainless Steel 304 roller installed to press the stoppers. Vial transfer below the wheel in which get stoppered. Duly stoppered vials further move on conveyor & collected on out feed turn table (optional) or on to conveyor of vial aluminum cap sealing machine for cap sealing operations.
| Model | ALVF-40 | ALVF-80 | ALVF-120 | |
|---|---|---|---|---|
| Filling Heads | Two | Four | Eight | |
| Production Rate | Up to 40 Vials/Minute | Up to 80 Vials/Minute | Up to 120 Vials/Minute | |
| Input Specification | ||||
| Vial Diameter | 15mm to 70mm | 15mm to 70mm | 15mm to 70mm | |
| Vial Height | 25mm to 140mm | 25mm to 140mm | 25mm to 140mm | |
| Filling Precision | ±1% | ±1% | ±1% | |
| Power Required | 1 H.P. | 1.5 H.P. | 2 H.P. | |
| Electrical Characteristics | 440 Volts, 3 Phase, 50 Hertz | 440 Volts, 3 Phase, 50 Hertz | 440 Volts, 3 Phase, 50 Hertz | |
| Overall Dimension | 2050mm (L) x 850mm (W) x 1680mm (H) | 2200mm (L) x 850mm (W) x 1680mm (H) | 3000mm (L) x 945mm (W) x 1680mm (H) | |
| * Power voltage can be adjusted as per customer’s domestic power voltage requirements. * Rights of technical improvements & modification reserved. * Illustrations & dimensions are shown for information purpose only. |
||||